Featured Archives

30L Carry Bag Spill Kit – General Purpose K24-2030
$120.00
30L Carry Bag Spill Kit – General Purpose

Compare

30L Carry Bag Spill Kit – General Purpose
Our most popular vehicle spill kit comes in a compact hi-vis carry bag, small enough to store in truck cabs or toolboxes, behind a door, placed in a laboratory cupboard, in a delivery van or behind Ute seats. Packed with a range of absorbents designed to contain and clean up all small spills. These kits are designed to be taken anywhere, with a strong handle for easy portability from vehicle to spill site. The 30 Litre Spill Kit contains absorbent socks to encircle spills and protect drains and absorbent pads and cushions to absorb the bulk of spilled liquid. It also contains highly versatile granular absorbent which enables it to absorb spills on both sealed surfaces such as concrete and asphalt, and unsealed surfaces such as gravel and dirt. Personal protective equipment and contaminated waste disposal bags are included for clean-up and disposal. It includes a laminated instruction card for usage guidance, and a reorder form for easy restocking. Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
30L Carry Bag Spill Kit – Oil & Fuel K24-2230
$115.00
30L Carry Bag Spill Kit – Oil & Fuel

Compare

30L Carry Bag Spill Kit – Oil & Fuel
Our most popular vehicle spill kit comes in a compact hi-vis carry bag, small enough to store in truck cabs or toolboxes, behind a door, placed in a laboratory cupboard, in a delivery van or behind Ute seats. Packed with a range of absorbents designed to contain and clean up all small spills. These kits are designed to be taken anywhere, with a strong handle for easy portability from vehicle to spill site.

The 30 Litre Spill Kit contains absorbent socks to encircle spills and protect drains and absorbent pads and cushions to absorb the bulk of spilled liquid. It also contains highly versatile granular absorbent which enables it to absorb spills on both sealed surfaces such as concrete and asphalt, and unsealed surfaces such as gravel and dirt. Personal protective equipment and contaminated waste disposal bags are included for clean-up and disposal. It includes a laminated instruction card for usage guidance, and a reorder form for easy restocking.

Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
50L Carry Bag Spill Kit – General Purpose K24-3050
$175.00
50L Carry Bag Spill Kit – General Purpose

Compare

50L Carry Bag Spill Kit – General Purpose
These spill kits are a compact, all-in-one kit designed especially for protecting your mobile workforce. They provide fast emergency response to any spill situation, and only take up a small space in larger machinery including trucks, excavators, cranes and drilling rigs. The 50 Litre Spill Kit comes packed in a heavy-duty, re-sealable bag and has handles for easy portability from vehicle to spill site.

It contains absorbent socks to encircle spills and protect drains and absorbent pads and cushions to absorb the bulk of spilled liquid. It also contains highly versatile granular absorbent which enables it to absorb spills on both sealed surfaces such as concrete and asphalt, and unsealed surfaces such as gravel and dirt. Personal protective equipment and contaminated waste disposal bags are included for clean-up and disposal. It includes a laminated instruction card for usage guidance, and a reorder form for easy restocking. Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
120L Wheeled Bin Economy Spill Kit – Oil & Fuel K26-4212E
$318.00
120L Wheeled Bin Economy Spill Kit – Oil & Fuel

Compare

120L Wheeled Bin Economy Spill Kit – Oil & Fuel
The spill kit on wheels – ready to be taken into action. The Stratex Economy Spill Kit range is a great value and high performing method of hazardous spill response. Packed with a range of absorbents designed to contain and clean up spills on both sealed and unsealed surfaces. Place these kits in strategic positions around your worksite to ensure compliance with environmental requirements. Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested. AVAILABLE IN: General Purpose | K26-4012E General Purpose Refill | K26-4012ER Oil & Fuel | K26-4212E Oil & Fuel Refill | K26-4212ER Chemical | K26-4412E Chemical Refill |K26-4412ER
120L Wheeled Bin Standard Spill Kit – General Purpose K26-4012S
$365.00
120L Wheeled Bin Standard Spill Kit – General Purpose

Compare

120L Wheeled Bin Standard Spill Kit – General Purpose
The Standard Range of Spill Kits are designed for indoor and outdoor spills on both sealed and unsealed surfaces. These can include sealed surfaces such as asphalt, concrete or metal, and also unsealed surfaces such as dirt or gravel. To ensure you can handle any spill incident, they contain a range of absorbents from pads, socks, cushions to granular absorbent.
Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
120L Wheeled Bin Standard Spill Kit – Oil & Fuel K26-4212S
$360.00
120L Wheeled Bin Standard Spill Kit – Oil & Fuel

Compare

120L Wheeled Bin Standard Spill Kit – Oil & Fuel
The Standard Range of Spill Kits are designed for indoor and outdoor spills on both sealed and unsealed surfaces. These can include sealed surfaces such as asphalt, concrete or metal, and also unsealed surfaces such as dirt or gravel. To ensure you can handle any spill incident, they contain a range of absorbents from pads, socks, cushions to granular absorbent.
Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
240L Wheeled Bin Standard Spill Kit – AdBlue K26-5024AB
$504.00
240L Wheeled Bin Standard Spill Kit – AdBlue

Compare

240L Wheeled Bin Standard Spill Kit – AdBlue
The Standard Range of Spill Kits are designed for indoor and outdoor spills on both sealed and unsealed surfaces. These can include sealed surfaces such as asphalt, concrete or metal, and also unsealed surfaces such as dirt or gravel. To ensure you can handle any spill incident, they contain a range of absorbents from pads, socks, cushions to granular absorbent. Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested. This spill kit is designed and contain AdBlue and other non-aggressive spills, and is ideal for use in fuel stations, heavy machinery workshops and emergency response.
240L Wheeled Bin Marine Spill Kit – Oil & Fuel K26-5200
$606.00
240L Wheeled Bin Marine Spill Kit – Oil & Fuel

Compare

240L Wheeled Bin Marine Spill Kit – Oil & Fuel
Specifically designed to respond to oil and fuel spills on water, these Spill Kits are packed with a range of hydrophobic (water repellent) absorbents. Even when fully saturated with oil, they retain the ability to float on water. As a result, these kits are ideal for use where spills occur on waterways such as drains, ports, marinas, harbours, lakes and rivers. Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
General Purpose Heavyweight Absorbent Roll 500mm x 40m MR1012B
$164.00
General Purpose Heavyweight Absorbent Roll 500mm x 40m

Compare

General Purpose Heavyweight Absorbent Roll 500mm x 40m
General Purpose Heavyweight Rolls are bonded to provide extra strength, meaning they will never come apart, even when fully saturated with oil. Heavyweight rolls are 380gsm thick and 40m long. They are perforated along the centre as well as across the width so they can be easily separated according to usage, minimising waste. Premium quality, these rolls are super absorbent and super strong!
General Purpose Heavyweight Absorbent Roll – 1m x 40m MR1017B
$322.00
General Purpose Heavyweight Absorbent Roll – 1m x 40m

Compare

General Purpose Heavyweight Absorbent Roll – 1m x 40m
General Purpose Heavyweight Rolls are bonded to provide extra strength, meaning they will never come apart, even when fully saturated with oil. Heavyweight rolls are 380gsm thick and 40m long. They are perforated along the centre as well as across the width so they can be easily separated according to usage, minimising waste. Premium quality, these rolls are super absorbent and super strong!
General Purpose Standard Absorbent Roll – 1m x 80m MR1019
$332.00
General Purpose Standard Absorbent Roll – 1m x 80m

Compare

General Purpose Standard Absorbent Roll – 1m x 80m
General Purpose Standard Rolls are bonded to provide extra strength, meaning they will never come apart, even when fully saturated with oil. Standard rolls are 200gsm thick and 80m long. They are perforated along the centre as well as across the width so they can be easily separated according to usage, minimising waste. Premium quality, these rolls are super absorbent and super strong! Available poly-wrapped or in a handy dispenser box for easy use and come in two different widths: 50 and 100cm.
Oil & Fuel Heavyweight Absorbent Roll – 1m x 40m OR2025B
$298.00
Oil & Fuel Heavyweight Absorbent Roll – 1m x 40m

Compare

Oil & Fuel Heavyweight Absorbent Roll – 1m x 40m
Oil & Fuel Heavyweight Rolls are bonded to provide extra strength, meaning they will never come apart, even when fully saturated with oil. Heavyweight rolls are 380gsm thick and 40m long. They are perforated along the centre as well as across the width so they can be easily separated according to usage, minimising waste. Premium quality, these rolls are super absorbent and super strong!
Oil & Fuel Standard Absorbent Roll – 1m x 80m OR2060
$318.00
Oil & Fuel Standard Absorbent Roll – 1m x 80m

Compare

Oil & Fuel Standard Absorbent Roll – 1m x 80m
General Purpose Standard Rolls are bonded to provide extra strength, meaning they will never come apart, even when fully saturated with oil. Standard rolls are 200gsm thick and 80m long. They are perforated along the centre as well as across the width so they can be easily separated according to usage, minimising waste. Premium quality, these rolls are super absorbent and super strong! Available poly-wrapped or in a handy dispenser box for easy use and come in two different widths: 50 and 100cm.
Oil & Fuel Absorbent Sock – 80mm x 1.2m (Box of 20) OS2023B
$206.00
Oil & Fuel Absorbent Sock – 80mm x 1.2m (Box of 20)

Compare
Oil & Fuel Absorbent Sock – 80mm x 1.2m (Box of 20)
Oil and fuel spill absorbents are designed to absorb hydrocarbon spills such as oils, solvents and fuels. Polypropylene oil and fuel absorbents are hydrophobic, meaning they will repel and float on water. This make them popular in marine environments to clean up oil sheens and spills in oceans, rivers, lakes and ponds.
Absorbent socks are designed to encircle spills for clean up or to protect areas from the path of spills. They absorb liquid spills quickly and stop them from spreading further.

Once absorbent socks have contained the spill, absorbent pads or granules can be used to soak up the pooled liquid
Ultra-absorbent filling is fast acting and retains absorbed liquid
Oil & Fuel Absorbent Products are hydrophobic (water repellent), and designed to absorb oils, fuels, solvents and most petrochemicals from land and water, as they repel water while readily absorbing all oils and fuels
They will float even when fully saturated with oil, making them ideal for spills on waterways and marine areas A 1.2m sock can absorb up to 4.5 litres.
Liquasweep X900 All-Purpose Sponge Absorbent – 7L GX900-07
$14.00
Liquasweep X900 All-Purpose Sponge Absorbent – 7L

Compare
Liquasweep X900 All-Purpose Sponge Absorbent – 7L
A natural sea sponge with exceptional absorption capacity. It can be used to absorb a wide range of liquid spills, including oils, fuels, solvents, paint, acids, and alkalis. Even when fully saturated, it remains dry and granular. Its non-leaching properties allow for safe disposal in appropriate landfill locations, making it an ideal solution for road transport spills.
Key Features:
Highly absorbent for various liquid spills
Retains a dry and granular form even when saturated
Safe for disposal in approved landfill sites due to non-leaching properties
Suitable for road transport spill management
Specifications:
Bag Size: 15kg
Pallet Quantity: 72 bags
Liquasweep All-Purpose Sponge Absorbent – 22L GX900-22
$32.50
Liquasweep All-Purpose Sponge Absorbent – 22L

Compare
Liquasweep All-Purpose Sponge Absorbent – 22L
A natural sea sponge with exceptional absorption capacity. It can be used to absorb a wide range of liquid spills, including oils, fuels, solvents, paint, acids, and alkalis. Even when fully saturated, it remains dry and granular. Its non-leaching properties allow for safe disposal in appropriate landfill locations, making it an ideal solution for road transport spills.
Key Features:
Highly absorbent for various liquid spills
Retains a dry and granular form even when saturated
Safe for disposal in approved landfill sites due to non-leaching properties
Suitable for road transport spill management
Specifications:
Bag Size: 15kg
Pallet Quantity: 72 bags
DefendaWipe 60 Disposable Cleaning Wipes WIP6012
$25.00
DefendaWipe 60 Disposable Cleaning Wipes

Compare
DefendaWipe 60 Disposable Cleaning Wipes
Use absorbent wipes on a roll for a cleaner and safer workshop. The DefendaWipe 60 industrial wipes have a unique spunlace composition, meaning they are low linting and will leave no residue behind.
Our industrial wipes have a Unique composite meaning they are low linting, leave no residue and very user-friendly
Extremely strong and absorbent, they will wipe clean instead of smearing like traditional rags
Ideal for heavy duty cleaning tasks for cleanup of oil, grime and solvents
We recommend Defendawipes for heavy vehicle workshops and industrial applications
Size: 42cm x 23cm x 60GSM
Box Contains: 150 Sheets
Carton Contains: 6 Boxes
DefendaWipe 120 Disposable Cleaning Wipes WIP6032
$61.00
DefendaWipe 120 Disposable Cleaning Wipes

Compare

DefendaWipe 120 Disposable Cleaning Wipes
Use absorbent wipes for a cleaner and safer workshop. The DefendaWipe 120 industrial wipes have a unique spunlace composition, meaning they are low linting and will leave no residue behind. Extremely strong and absorbent, DefendaWipes won’t tear under pressure and will clean surfaces instead of smearing like traditional rags. With a greater thickness, the DefendaWipe 120 wipes will absorb up to twice the volume of spilled liquid than a rag and are ideal for heavy vehicle workshops and industrial applications. Easy to dispense from the box, the wipes are quick to use in emergency situations and only take up a small amount of storage space. The size of the wipe is 32cm H x 41cm W x 120gsm and each box contains 160 sheets. These wipes suit applications such as Workshops, Mining, Maintenance, Healthcare, General Cleaning, Food Processing and Janitorial.
DefendaWipe 60 Disposable Cleaning Wipes – Jumbo Roll WIP7012
$58.00
DefendaWipe 60 Disposable Cleaning Wipes – Jumbo Roll

Compare
DefendaWipe 60 Disposable Cleaning Wipes – Jumbo Roll
Use absorbent wipes on a roll for a cleaner and safer workshop. The DefendaWipe 60 industrial wipes have a unique spunlace composition, meaning they are low linting and will leave no residue behind.
Our industrial wipes have a Unique composite meaning they are low linting, leave no residue and very user-friendly
Extremely strong and absorbent, they will wipe clean instead of smearing like traditional rags
Ideal for heavy duty cleaning tasks for cleanup of oil, grime and solvents
We recommend Defendawipes for heavy vehicle workshops and industrial applications
Wipe Size: 31.8 x 34cm x 60GSM
Roll Contains: 475 Sheets
Pallet Contains: 112 Boxes
Wipes Roll Dispenser Floor Standing – 500mm DSW7090K
$110.00
Wipes Roll Dispenser Floor Standing – 500mm

Compare

Wipes Roll Dispenser Floor Standing – 500mm
Efficient & economic dispenser for Stratex Defendawipe rolls. Systems minimise waste & promote clean safe workshops. Space efficient and portable – can be placed near at hand in any workshop.
Size: 500W x 730D x 1080Hmm
Sale
Single IBC Bunded Spill Pallet, 1100L Sump (1600W x 1600L x 700H mm) POLY11120Y
$2,098.00 $1,888.00
Single IBC Bunded Spill Pallet, 1100L Sump (1600W x 1600L x 700H mm)

Compare
Single IBC Bunded Spill Pallet, 1100L Sump (1600W x 1600L x 700H mm)
The Stratex Single IBC Bunded Spill Pallet provides a safe and efficient storage solution for hazardous liquids. A low 700mm working height helps to reduce risks during loading and unloading. It also features handy fork pockets for manoeuvrability. Stratex bunded spill pallets are constructed from rotomoulded polyethylene, The rotomoulding process ensures that the bund has consistent wall thickness, delivering superior strength, durability and chemical resistance. The single IBC bund has a safe working load rating of 1350kg.
Features
Rotomoulded construction provides superior strength, durability and chemical resistance.
This bund features a low height for ease of use (700mm)
Stackable, space saving, innovative, protected design ensures low delivery costs for multiple bunding units.
Generous working area (2.5m2) for one IBC or multiple small containers.
Fork pockets for easy movement (Remove IBC and empty spill pallet before moving).
Optional clip-on dispensing units direct any spills while decanting into the sump, meaning liquids can be retrieved and reused saving time and money.
All-weather covers for outdoor storage and sump plugs for drainage and spilled liquid recovery available.
Dimensions: 700H x 1600W x 1600L mm.
1100L Sump.
Sale
Double IBC Bunded Spill Pallet – 1250L Sump POLY11053YK
$2,330.00 $2,097.00
Double IBC Bunded Spill Pallet – 1250L Sump

Compare
Double IBC Bunded Spill Pallet – 1250L Sump
The Stratex Double IBC Bunded Spill Pallet provides a safe and efficient storage solution for hazardous liquids. A low 600mm working height helps to reduce risks during loading and unloading. It also features handy fork pockets for manoeuvrability. Stratex bunded spill pallets are constructed from rotomoulded polyethylene, The rotomoulding process ensures that the bund has consistent wall thickness, delivering superior strength, durability and chemical resistance. The double IBC bund has a safe working load rating of 1250kg.
Features
Rotomoulded construction provides superior strength, durability and chemical resistance.
This bund features a low height for ease of use (600mm)
Stackable, space saving, innovative, protected design ensures low delivery costs for multiple bunding units.
Fork pockets for easy movement (Remove IBC and empty spill pallet before moving).
Optional clip-on dispensing units direct any spills while decanting into the sump, meaning liquids can be retrieved and reused saving time and money.
All-weather covers for outdoor storage and sump plugs for drainage and spilled liquid recovery available.
Dimensions: 600H x 1356W x 2322L mm.
1250L Sump.
4 Drum Bunded Spill Pallet, 240L Sump POLY11008Y
$568.00
4 Drum Bunded Spill Pallet, 240L Sump

Compare
4 Drum Bunded Spill Pallet, 240L Sump
Drum bunded spill pallets are designed to fit four 205 litre drums for safe and practical storage of hazardous liquids, oils, chemicals, batteries and more.
Features:
240 litre sump capacity complies with Australian regulations
Forklift spaces compatible with most fork lifts and pallet trucks for easy manoeuvring.
Lightweight, tough and durable polyethylene construction
Superior chemical resistance
Low bund working height provides ease of access
Dimensions: 1300 x 1300 x 300mm
1250kg safe working load
2 Drum Bund Work Floor – 120L Sump POLY11034Y
$559.00
2 Drum Bund Work Floor – 120L Sump

Compare
2 Drum Bund Work Floor – 120L Sump
Stratex Drum Bund Work Floor is a flexible decking solution for creating liquid handling workstations and storage areas to fit your workplace. Low profile design gives easy access to drum tops and requires less effort to load and unload drums.

All work floors and ramps have a slip resistant texture that provides traction to prevent slips and falls. Joint connector strips can be added for superior safety and finish. Two different lengths of connectors and a cross connector is available

Key features
Supports safe and compliant liquid drum storage.
Can be customised to suit various requirements.
Heavy duty polyethylene construction.
Slip resistant surface finish.
Single IBC Hard Cover Unit (2265H x 1775W x 1770Dmm) – 1260L Sump POLY11048
$6,880.00
Single IBC Hard Cover Unit (2265H x 1775W x 1770Dmm) – 1260L Sump

Compare
Single IBC Hard Cover Unit (2265H x 1775W x 1770Dmm) – 1260L Sump
Hard Cover Units provide outdoor weather resistant storage for IBC tanks. Features double swing doors with three-point locking mechanism, integrated 2 litre platform spill tray and ample head space for IBC mixers, funnels and pumps.. Available to be moved with a forklift, this 100% polyethylene design will not rust or corrode, providing years of service under rigorous conditions.
Size: 2265H x 1775W x 1770Dmm
Sump Capacity: 1260L
Integrated venting panels
Roof designed for quick rainwater run-off to the rear
Flat pack shipping
4 Drum Bunded Spill Pallet – Galvanised Steel SLR4
$730.00
4 Drum Bunded Spill Pallet – Galvanised Steel

Compare

4 Drum Bunded Spill Pallet – Galvanised Steel
If your workplace stores flammable liquids, using bunded storage is an important part of safe spill control. Steel bunds are fire resistant for the storage of hydrocarbons, solvents and fuels. Stratex steel bunded spill pallets are a low profile containment solution for 205L (44 gallon) drums with a high sump capacity. These bunded pallets feature FRP grating with an integrated drain bung. Steel bunding can be used for most dangerous goods and helps with your environmental compliance.
1210W x 1210D x 265H (245L Sump)
EnviroPad Spill Mat – L20 (Large) 137 x 91cm SPL220
POA
Add to wishlist
Compare
Request a Quote
Read more
EnviroPad Spill Mat – L20 (Large) 137 x 91cm
The EnviroPad is a revolutionary spill pad that captures and solidifies hydrocarbon spills including oils, fuels and hydraulic fluids. By using smart polymer technology, the EnviroPad turns these liquids into solid rubber, preventing any contaminants from leaking or leaching into the environment – even under pressure.
The EnviroPad is not affected by heavy rain or water, reducing contaminated waste disposal costs. It is safe to use outdoors in all weather conditions, and can be carried or stored upright after use. Its non-leaching characteristics mean that the EnviroPad can be safely disposed of landfill (subject to local and state regulations).
Unique smart polymer spill pad
Solidifies oil and fuel so it can’t leak out
No pools of oily rainwater
No risk of overflowing
Doesn’t need sidewalls or a liner
Can be safely used outdoors and jet washed
Just as effective with Hydrotreated Vegetable Oil (HVO)
Instructions printed on the top
Absorbs up to 20.2L of oil
EnviroPad Spill Mat – XL30 (X-Large) 137 x 137cm SPL230
POA
Add to wishlist
Compare
Request a Quote
Read more
EnviroPad Spill Mat – XL30 (X-Large) 137 x 137cm
The EnviroPad is a revolutionary spill pad that captures and solidifies hydrocarbon spills including oils, fuels and hydraulic fluids. By using smart polymer technology, the EnviroPad turns these liquids into solid rubber, preventing any contaminants from leaking or leaching into the environment – even under pressure.
The EnviroPad is not affected by heavy rain or water, reducing contaminated waste disposal costs. It is safe to use outdoors in all weather conditions, and can be carried or stored upright after use. Its non-leaching characteristics mean that the EnviroPad can be safely disposed of landfill (subject to local and state regulations).
Unique smart polymer spill pad
Solidifies oil and fuel so it can’t leak out
No pools of oily rainwater
No risk of overflowing
Doesn’t need sidewalls or a liner
Can be safely used outdoors and jet washed
Just as effective with Hydrotreated Vegetable Oil (HVO)
Instructions printed on the top
Absorbs up to 30.4L of oil
Collapsible Sidewall Portable Bunding – 1260L DOBC1260
$1,849.00
Collapsible Sidewall Portable Bunding – 1260L

Compare
Collapsible Sidewall Portable Bunding – 1260L
Stratex Collapsible (or drive-over) Portable Bunds are ideal for the safe and compliant storage of drums, plant and equipment while containing any hazardous liquid leaks and spills. It features a collapsible sidewall which is quick and easy to access for vehicles, forklifts and trolleys.
Engineered to withstand tough conditions and made from long lasting heavy duty 900gsm PVC material. Portable collapsible bunding is resistant to punctures, tears, abrasions, UV radiation, temperature extremes, hydrocarbons, oils, methane and alkalis.

FEATURES
Stratex collapsible or drive-over portable bunds offer a quick, efficient and durable solution for indoor or outdoor use.
Collapsible side wall allows access for vehicles, forklifts, drum and pallet trolleys, while providing containment for any incidental spills.
Compact design for easy transport and storage.
Can be erected in seconds with no tools needed.
Ideal for pump and generator bunding, dewatering, temporary storage of tanks, drums, heavy equipment and vehicle wash bays.
Strong lap joint welds provide excellent rip, tear and puncture resistance.
Fuel and chemical resistant.
Includes eyelets for securing with pegs on soft ground
Side supports can be lowered in seconds to provide true drive in / drive out capability.
Custom sizing and extra heavy duty XR5 geomembrane material available by request.
Megabund Floor Bunding, Per Metre (w/ Dynabolts) 25mmH x 150mmW DRP1150K
$105.00
Megabund Floor Bunding, Per Metre (w/ Dynabolts) 25mmH x 150mmW

Compare
Megabund Floor Bunding, Per Metre (w/ Dynabolts) 25mmH x 150mmW
MegaBund Floor Bunding is a premium polyurethane extruded floor bunding for the safe containment of hazardous liquids. With excellent chemical resistance, MegaBund is a versatile chemical storage solution which can be used in a range of different applications.

Flexible and low profile, this highly visible floor bunding is designed to reduce trip hazards and improve workplace safety, while being easily traversible by vehicles and forklifts. Stay compliant with Australian Standards such as AS/NZS 3833:2007 and avoid EPA fines. The floor bunding can be cut into desired lengths to create a custom sized storage area, reducing cost and wastage.

MegaBund is easy and stress free to install; it is manufactured with pre-moulded points for dynabolts and only basic tools are required. 10 Dynabolts are included in the purchase of each floor bunding length. When purchasing tubes of Fulaprene Adhesive, we recommend using approximately 1 tube of adhesive to 3 lengths of Megabund. Watch the video for a step-by-step guide.

Premium polyurethane extruded floor bunding with excellent resistance against acids, alkalis, fuels and oils.
Heavy duty rigid floor bunding, suitable for high traffic areas including heavy vehicles and machinery.
Low profile design is easily traversable by forklifts and vehicles.
Available with corner units to complete the bunded area.
Size: 25mmH x 150mmW x 1mL
Rubber Floor Bunding, Per Metre (w/ Dynabolts) 40H x 115W mm DRP11074K
$87.50
Rubber Floor Bunding, Per Metre (w/ Dynabolts) 40H x 115W mm

Compare

Rubber Floor Bunding, Per Metre (w/ Dynabolts) 40H x 115W mm
Heavy-duty Rubber Floor Bunding is ideal for a bunding and spill containment solution for areas subject to human and vehicle traffic. Perfect for bunding around pallet racking, wash bays, fuel dispensing areas and oil storage facilities.
The bunding contains or redirects hazardous spills without the need for major construction or assembly. Made from non-porous, rubber with excellent chemical resistance and includes DynaBolts for installation.

Size: 40mm high x 115mm wide
Class 3 Flammable Liquid Storage Cabinet – 250L SASC250
$2,119.00
Class 3 Flammable Liquid Storage Cabinet – 250L

Compare
Class 3 Flammable Liquid Storage Cabinet – 250L
Designed for the storage of class 3 flammable liquids such as paints, varnishes and liquids which emit a flammable vapour.
Manufactured to be fully compliant with Australian Standards.
High capacity liquid tight sump to contain spills
Reliable smooth gentle hydraulic self-closing doors with adjustable closure rate
Stainless steel pin continuous hinging for strength and reliability
Strong fully adjustable shelving perforated for free air movement, 100mm adjustment increments
State of the art powder coat finish for high durability and performance
Built in flash arrestors and vent openings (for mechanical ventilation systems)
Clear safety signs and directors
Weight: 123KG
Ext Size: 1750H x 1100W x 500D (mm)
Int Size: 1503H x 1018W x 420D (mm)
Max Capacity: 250L
Shelves: 3 (including base level)
Class 8 Corrosive Substance Storage Cabinet – 250L SASC2508
$2,565.00
Class 8 Corrosive Substance Storage Cabinet – 250L

Compare
Class 8 Corrosive Substance Storage Cabinet – 250L
Designed for the safe and secure storage of all corrosive substances which are present in almost every workplace. Class 8 substances can cause great damage to metal so all Class 8 cabinets come with polyethylene sump liners ensuring corrosion will not occur in the event of a spill.
Manufactured to be fully compliant with Australian Standards.
High capacity liquid tight sump to contain spills
Reliable smooth gentle hydraulic self-closing doors with adjustable closure rate
Stainless steel pin continuous hinging for strength and reliability
Strong fully adjustable shelving perforated for free air movement, 100mm adjustment increments
State of the art powder coat finish for high durability and performance
Built in flash arrestors and vent openings (for mechanical ventilation systems)
Clear safety signs and directors
Most cabinet types available in sizes from 30L-250L in capacity
Sustainable
GuardDog Side-entry Drain Filter 810mmW x 1500mmL SPL091A
$298.00
GuardDog Side-entry Drain Filter 810mmW x 1500mmL

Compare
GuardDog Side-entry Drain Filter 810mmW x 1500mmL
The GuardDog drain filter offers a revolutionary approach to sediment control. It fits to cover most stormwater drains to effectively prevent silt, sediment, hydrocarbons and debris from entering our waterways and ocean.

Traps sediment and hydrocarbons
Improves water receiving quality
100% recycled absorbent media
53 micron filtration (0.053mm)
Absorbs up to 12 litres of hydrocarbons
Lightweight, low profile and durable
Side-entry GuardDog features aluminium side strips for a perfect fit around kerbs

Filtration Innovation
The GuardDog works by using an innovative absorbent media called Spilltration® Husky, which is made from 100% recycled post-consumer waste. The material’s fibres absorb hydrocarbons and trap sediment particles as small as 53 microns (0.053mm), finer than a human hair. Spilltration® Husky also delivers exceptional water flow characteristics due to its unique construction, which allows water to wick through, even when saturated with oil.

Performance by Design
The GuardDog features a heavy-duty polyethylene mesh top for drive over durability. The Spilltration® Husky absorbent media removes and traps oils, fuels, sheens and sediment. A raised centre helps to create a damming effect and improve performance in high flow situations. Overflow port prevents water from backing up in heavy rain events. Eyelets provide a means to secure the GuardDog to metal grates with metal ties or concrete bolts.

Suitable for Most Drain Types
The standard GuardDog drain filter is designed to cover most box and v-grate drains. The side-entry GuardDog is wider and features aluminium strips to contour around most kerb inlet drains with or without grates. Custom sizing is also available by request.

When to use one?
The GuardDog is ideal for protecting drains during construction activity. It can also be used in carparks, manufacturing facilities, waste management, rail yards, refineries. The GuardDog helps to improve environmental compliance and avoid penalty notices.

Installation Versatility
The GuardDog can be installed in a variety of ways. It can be screwed directly into the concrete, secured to drain grates via metal cable ties or using high-powered magnets. See our installation guide to find out more.

Superior to Alternatives
Alternatives such as silt socks and coir logs do not trap hydrocarbons, and drain pollution guards can become overloaded to block drains and cause flooding. Unlike silt socks the GuardDog will not split if driven over – it’s a low profile solution that’s foot and vehicle traffic friendly.

ISC Verified Innovation
The GuardDog drain filter was verified by the Infrastructure Sustainability Council (ISC) as Australia-first innnovation for its use on the Monash Freeway upgrade. It is listed on iSupply and may assist in obtaining IS Credits for Receiving Water Quality (ISv1.2 Dis-1 / ISv2.1 Env-1), Diversion from Landfill (ISv1.2 Was-2), Innovation Challenge 8 (ISv1.2 & ISv2.1 Inn-1). To find out more contact your Stratex representative.
Sustainable
Premium Silt Sock 150mm x 1m – Recycled Aggregate-filled (Each) MOQ 10 30-SIBGA-RA
$16.48
Premium Silt Sock 150mm x 1m – Recycled Aggregate-filled (Each) MOQ 10

Compare
Premium Silt Sock 150mm x 1m – Recycled Aggregate-filled (Each) MOQ 10
Stratex premium silt socks are made from heavy duty mesh sleeves and are available unfilled or pre-filled with recycled aggregate.
A silt sock serves as a simple yet effective sediment and erosion control method. It consists of a fabric mesh sleeve filled with rocks or gravel, and these socks are strategically placed in and around stormwater drains and gutters. Their purpose is to protect waterways and silt and sediment from leaving worksites during heavy rain.

100% recycled aggregate filling
Produces less dust than scoria
Reduces landfill waste
Contributes towards a circular economy
High Flow Rate 23Ltr/m2/min
Size: 150mm x 1m
Easy to install and remove
Convenient carry handle
Reusable
Sustainable
100% Recycled Silt Sock – 150mm x 1m – Pre-filled (Each) 35-SIBGA-R
POA
Add to wishlist
Compare
Request a Quote

Request a Quote
Read more
100% Recycled Silt Sock – 150mm x 1m – Pre-filled (Each)
The Stratex Recycled Silt Sock is Australia’s first 100% recycled silt sock. It’s made using temporary banner mesh and reclaimed aggregate from our civil construction partners, disrupting the landfill waste stream.

Silt socks provide a simple yet effective sediment and erosion control method. They can be placed in and around worksite stormwater drains and gutters. Their purpose is to protect waterways from contaminated runoff by retaining silt and sediment during heavy rain.

In addition to using recycled materials in its construction, Stratex Recycled Silt Socks are produced in collaboration with a local social enterprise, Assembled Threads. This partnership ensures a high quality of product is achieved, whilst helping to provide meaningful employment opportunities for individuals from Culturally and Linguistically Diverse (CALD) backgrounds.

The Stratex Recycled Silt Sock is listed on iSupply and may assist you in obtaining the following IS Credits: Inn-1 (ISv1.2 & ISv2.1) Innovation Challenge: Sustainable Suppliers and iSupply. Dis-1 (ISv1.2) and Env-1 (ISv2.1) improve receiving water quality.

Made using heavy duty recycled banner mesh
Recycled waste aggregate filling
Reduces landfill waste
Contributes towards a circular economy
Produces less dust than scoria
Disrupts landfill waste stream
Made in Australia using social enterprise
150mm x 1m long
Approximate weight 12kg
Sustainable
100% Recycled Silt & Hydrocarbon Sock – 150mm x 1m – Pre-filled (Each) 35-SIBGA-RH
POA
Add to wishlist
Compare
Request a Quote

Request a Quote
Read more
100% Recycled Silt & Hydrocarbon Sock – 150mm x 1m – Pre-filled (Each)
The Stratex Recycled Silt Sock is Australia’s first 100% recycled silt sock. It’s made using temporary banner mesh and reclaimed aggregate from our civil construction partners, disrupting the landfill waste stream.

Silt socks provide a simple yet effective sediment and erosion control method. They can be placed in and around worksite stormwater drains and gutters. Their purpose is to protect waterways from contaminated runoff by retaining silt and sediment during heavy rain.

This silt sock features an additional hydrocarbon filter, achieved with a layer of Spilltration Husky material. The material will absorb the hydrocarbon oily sheen while allowing water to flow through.

In addition to using recycled materials in its construction, Stratex Recycled Silt Socks are produced in collaboration with a local social enterprise, Assembled Threads. This partnership ensures a high quality of product is achieved, whilst helping to provide meaningful employment opportunities for individuals from Culturally and Linguistically Diverse (CALD) backgrounds.

The Stratex Recycled Silt Sock is listed on iSupply and may assist you in obtaining the following IS Credits: Inn-1 (ISv1.2 & ISv2.1) Innovation Challenge: Sustainable Suppliers and iSupply. Dis-1 (ISv1.2) and Env-1 (ISv2.1) improve receiving water quality.

Made using heavy duty recycled banner mesh
Recycled waste aggregate filling
Reduces landfill waste
Contributes towards a circular economy
Produces less dust than scoria
Disrupts landfill waste stream
Made in Australia using social enterprise
Absorbs oily hydrocarbon sheen from road surfaces
150mm x 1m long
Approximate weight 12kg
Sustainable
Coir Log – 200mm x 2.4m Length (MOQ 10) CL240
$54.00
Coir Log – 200mm x 2.4m Length (MOQ 10)

Compare
Coir Log – 200mm x 2.4m Length (MOQ 10)
Stratex Coir Fibre Logs are made from natural coconut fibre bound by a 100% biodegradable coir fibre netting. Wooden Stake installation is quick and easy with pre-drilled holes. They are ideal for constructing check structures, sediment control, managing changes in stream flow velocity, shaping channels and stabilising banks and shorelines.
An environmentally friendly solution for bush regeneration projects, coir logs help hold moisture for tree and plant growth whilst providing a structure for vegetation to establish and take hold for long term stabilisation.
Features
Pre-drilled holes for quicker and easier stake installation
Save on installation time and costs
Uses less wooden stakes on installation
Higher density fibres for increased performance and life span
Dimensions: 200mm x 2.4m
Manual Handling Risks with Coir Logs
Some coir logs can be as large as 300mm in diameter and 3m long. On average these weigh over 20kg. They are heavy, cumbersome and usually require two people to unload and install on site. Given their length and weight, there is an increased risk of manual handling injury to operators. Stratex Coir Logs are 200mm diameter, 2.4m in length and weigh under 12kg, allowing safer handling by an individual operator. This unique sizing not only provides the benefit of lower freight cost to site, but more importantly are a safer and easier product to install.
Minimum order quantity: 10.
Pallet quantity: 30
Sustainable
Coir Mesh Matting – 2m x 25m x 700gsm CMM225
$188.00
Coir Mesh Matting – 2m x 25m x 700gsm

Compare
Coir Mesh Matting – 2m x 25m x 700gsm
Coir mesh is a heavy duty, lower cost alternative to jute matting. It can be used to stabilise sloped soil banks and swales, helping to retain moisture whilst preventing wind and rain erosion. Coir mesh can also prevent weed growth. Simply place coir mesh over soil and cut for vegetation as required. Mesh will biodegrade over time, enriching soil with added nutrients and structure.
Highly effective method to control erosion and stabilise soil
Made from coconut husk fibres, a renewable byproduct of the coconut production process
Acts as a barrier to prevent soil particles from being disturbed by wind and water
Helps plants establish and retains moisture in soil
Releases nutrients into soil as coir fibres slowly biodegrade over time
Prevents and inhibits weed growth
2m x 25m to suit most applications
700gsm thick and woven to withstand prolonged UV exposure and high water flow rates
Can be used in conjunction with other erosion control products such as coir logs, silt socks and silt fences
Weight 45kg
Timber Stake – 25x25mm x 1.2m TS1200-25
$2.98
Timber Stake – 25x25mm x 1.2m

Compare
Timber Stake – 25x25mm x 1.2m
Quality Australian Hardwood
25mm x 25mm x 1200mm
Price per stake, supplied in bundles of 25
Dewatering Bag – Silt Filter (1200 x 1200mm) SDB1010-S
$264.00
Dewatering Bag – Silt Filter (1200 x 1200mm)

Compare

Dewatering Bag – Silt Filter (1200 x 1200mm)
Dewatering Bags, also known as Sediment Filter Bags, are perfect for pumping and filtering sediment laden water from construction or mining sites. They provide a cost effective and simple method of removing silt and heavy particles from excavation water. Manufactured from strong non-woven geotextile which allows water to filter freely through the bag while retaining solids. Flow rate of 80L/m2/sec, subject to variation during usage. Featuring a 100mm diameter hose inlet as standard, the Dewatering Bags can be custom made almost any size to suit different project requirements.
The Silt and Hydrocarbon Filter Bags include an oil absorbent filtration media inside the geotextile bag. They are used to dewater an area containing both hydrocarbon and sediment contamination.
Concrete Washout Bag, 2470kg – 177 x 105 x 39 cm CWB2470
$46.00
Concrete Washout Bag, 2470kg – 177 x 105 x 39 cm

Compare
Concrete Washout Bag, 2470kg – 177 x 105 x 39 cm
The Stratex Concrete Washout Bag provides a quick and convenient solution to contain all concrete washout waste. The bag is simply placed under the chute or hopper and the slurry is contained in the plastic/polyethylene inner liner in the bag. When the concrete is set, the bag is forkliftable with built in loops for safe and easy transportation to an offsite location. All bags are fully tested and compliant with Australian Standard AS3668-1989 and have safe working loads listed below. Once set, the Concrete Washout Bag and its contents creates a versatile secondary product to use for car park walls, low retaining walls or designated compounds. The bags are perfect for use in applications such as Civil Construction, Road Construction & Commercial Construction.

Dimensions: 177cm L x 105cm W x 39cm H
Capacity: 0.70 cubic metres
Safe Working Load: 2470 Kg
Must only be lifted once waste has become solid
Concrete Collection Tray – 0.85cu.m CCT085
$2,248.00
Concrete Collection Tray – 0.85cu.m

Compare
Concrete Collection Tray – 0.85cu.m
The Concrete Collection Tray is designed to limit environmental damage wherever a concrete pump is being used on site. This low profile tray fits under the concrete pump to collect spillage washout water and concrete slurry waste. It features four corner lifting lugs and four d-rings for tipping.
Working Load Limit: 1500kg
Capacity: 0.85 cu.m
Overall Dimensions: 2300L x 1200W x505H mm
Fork Pocket Centres: 750mm
Weight: 255kg
Features:
Constructed from extra strong 4.8mm steel
Low profile tray bin with tapered sides
Reinforced base and sides
Fitted with crane lifting and up-ending lugs
Heavy duty yellow zinc powdercoated finish
Design complies with AS4991
Concrete Washout Filtration Unit CSS115
POA
Add to wishlist
Compare
Request a Quote

Request a Quote
Read more
Concrete Washout Filtration Unit
The Concrete Washout Filtration Unit is designed for the safe and convenient handling of concrete washwater by dealing with the harmful waste on site. The purpose constructed filtration bag is manufactured from a 300gsm, 900mm cube non-woven geotextile fabric inner layer with a bulk bag protective external. Sand, gravel and suspended concrete particles as fine as 80 microns are separated from the concrete slurry generated from the washout of concrete trucks and other equipment onsite and from saw cutting, core drilling, grinding and grooving concrete. Excess water passes through the filter bag and is captured in the holding tank below for testing and treatment. This unit can also be used as a dewatering station for filtering sediment laden water on sites that need to control the amount of sediment or pollution runoff.
Features:
Allows best practice and EPA compliance for handling concrete slurry onsite
Suits concrete slurry from truck & equip washout, concrete cutting, coring & grinding
Can be used for pumping and filtering sediment from silt laden water
Filters and separates washout particles to 80 microns from slurry water
Filter bag is suspended from frame for easy removal when full by crane or forklift
Washout up to 80 trucks before replacing filter bag (1 filter bag supplied with unit, additional filter bags available separately CSS115FB)
Wastewater in tank can be tested and treated without the need for off-site processing
50mm valve fitted standard
Fork guides and crane lugs fitted for easy relocation around the site
Enamel paint finish
Narrow Brim Helmet HNB989-W
$19.90
Narrow Brim Helmet

Compare
Narrow Brim Helmet
The new Australian Made, Vented Hard Hat provides head protection that conforms to Australian Safety Standards.
Product Features
Designed and manufactured in Australia
AS/NZS 1801:1997 SAI Global Certified Lic SMK41211
Sliplock Harness adjustment for easy, secure fitting
6 point webbed harness & cradle system
11 ventilation points for increased airflow
Lightweight, streamlined design
UV and impact resistant ABS material
25mm accessory slot for earmuffs and face visors
Replaceable sweatband for user comfort
Microporous Coveralls, Type 5 / 6 – X-Large COV056-XL
$6.98
Microporous Coveralls, Type 5 / 6 – X-Large

Compare
Microporous Coveralls, Type 5 / 6 – X-Large
Excellent Type 5/6 protection barrier against dry particles (including asbestos fibres), liquid aerosols, light spray and splashes
Soft and light, the microporous material facilitates ease of movement
2-way zipper with covering flap for extra protection and ease of use
3-panel hood allows additional PPE to be worn without interference
Elastic cuffs, waist, ankles and hood for increased protection
The Class 5/6 coveralls are ideal for the following applications:
Paint spraying & powder coating
Coating & Resin applications
Light industrial cleaning
Machine maintenance
Asbestos inspection & removal
Site preparation, insulation
Cement manufacturing
Grinding & polishing
Pharmaceutical processing and handling toxic powders
Chemical Resistant Coveralls – X Large COV300-XL
$32.98
Chemical Resistant Coveralls – X Large

Compare

Chemical Resistant Coveralls – X Large
Chemical Resistant Coveralls help offer Type 3-B, 4, 5 and 6 barrier protection against a wide range of inorganic chemical and biological hazards, yet are lightweight and comfortable too. These innovative garments help provide protection against both chemical and biological hazards (meets EN 14126 requirements). Thanks to their ergonomic fit, they help wearers to handle even difficult tasks more easily and comfortably.
Stratex Leather Welding Jacket – Large WJ2058-L
$88.00
Stratex Leather Welding Jacket – Large

Compare
Stratex Leather Welding Jacket – Large
The Stratex Leather Welders Jacket protects against abrasion, sparks, spatter and heat. It is suitable for use in most welding applications that involve metal inert gas and stick welding. The jacket is constructed using premium quality cow leather and features strong and heat resistant Kevlar thread.

High quality red cow split leather
Kevlar stitched to increase resistance to heat, cuts and abrasion
Moderate heat protection
Sold and packaged individually
Hasp – Vinyl Coated Hasp 6 Hole – Red – 38mm SSH038
$9.95
Hasp – Vinyl Coated Hasp 6 Hole – Red – 38mm

Compare
Hasp – Vinyl Coated Hasp 6 Hole – Red – 38mm
Steel Lockout Hasp
Lockout by multiple workers at each lockout point
Keeps equipment inoperative while repairs or adjustments are being made
Control cannot be turned on until last worker’s safety padlock is removed from hasp
Heavy gauge steel jaw with red vinyl coated handle
Barricade Caution tape – Yellow Black, 100m x 75mm BTC710
$11.48
Barricade Caution tape – Yellow Black, 100m x 75mm

Compare
Barricade Caution tape – Yellow Black, 100m x 75mm
Non-adhesive barricade tape
100 metre roll x 75mm width
Heavy duty polyethylene
Stainless Steel Safety Shower & Eyewash EY1027-SS
$1,705.15
Stainless Steel Safety Shower & Eyewash

Compare
Stainless Steel Safety Shower & Eyewash
The combination safety shower & eyewash unit saves space and fits easily into any work environment, allowing workers to flush away hazardous substances that can cause injury. The shower valve operates quickly by a pull rod with a round handle. Shower provides a superior washdown with a more even spray pattern. Eyewash operated by a large, attractive push handle. Safe, steady water flow under varying water supply conditions from 0.2-0.8 Mpa is assured by integral flow control valve assembly.
Technical Details
Material: 304 Stainless Steel
Shower Head: 10 inch 304 Stainless Steel Shower Head
Eyewash Bow: 11-1/2 inch 304 Stainless Steel Eyewash Bowl
Spray Head: ABS plastic in safety yellow colour
Valve: Shower valve is made of 1 inch SS ball valve
Eyewasher valve is made of 1/2 inch SS ball valve
Pedestal: 304 Stainless Steel Pedestal
Foot treadle: 304 Stainless Steel
Flow Valve build in to avoid secondary hurt
Water working pressure: 0.2MPA-0.8MPA
Flow control: 76L/Min
Standard: EN 15154-1&2, AS 4775:2007, ANSI Z358.1-2014
Gross Weight: 18.8KGS
Net Weight: 17.5KGS
Dimension: 91cmx41cmx30cm
Applications:
Medical laboratories
Dangerous and corrosive materials
Chemical manufacturing
Decontamination
Sustainable
100% Recycled Drain Guard SPL100A
POA
Add to wishlist
Compare
Request a Quote

Request a Quote
Read more
100% Recycled Drain Guard
The Stratex Recycled Drain Guard provides temporary protection for stormwater drains against sediment and hydrocarbons. It is made from recycled PVC banner mesh and Spilltration Husky absorbent media, both of which are made from 100% recycled materials The Recycled Drain Guard is designed for rapid deployment and can be installed with a weighted object, such as a silt sock or sand bag.

The Recycled Drain Guard can also be installed underneath drain grates for a more durable and semi-permanent solution. Simply fit drain guard to underside of grate and trim excess material.

FEATURES
Made from recycled PVC banner signage mesh and Spilltration Husky absorbent media.
Provides temporary stormwater drain protection against sediment and hydrocarbons.
Designed for use with weighted object such as silt sock or sandbag
Laboratory tested to provide sediment filtration down to 53 microns (0.053mm)
Contributes to a circular economy by reducing landfill waste.
Proudly made in Australia by social enterprise, Assembled Threads.
Silt socks and sandbags available separately.
Oil & Fuel Heavyweight Absorbent Roll – 1m x 40m OR2030L
$298.00
Oil & Fuel Heavyweight Absorbent Roll – 1m x 40m

Compare

Oil & Fuel Heavyweight Absorbent Roll – 1m x 40m
Oil & Fuel Heavyweight Rolls are bonded to provide extra strength, meaning they will never come apart, even when fully saturated with oil. Heavyweight rolls are 380gsm thick and 40m long. They are perforated along the centre as well as across the width so they can be easily separated according to usage, minimising waste. Premium quality, these rolls are super absorbent and super strong!