Timber Stake – 25x25mm x 1.2m | TS1200-25
"*" indicates required fields
Bulk Order Request
Available for pickup
Sabreshield Safety Gloves are made from genuine black foam nitrile material, providing a breathable and lightweight coating the palm.
Ultimate dexterity and feel
Excellent abrasion resistance
Black 13 gauge nylon seamless shell for increased comfort and breathability
Soft, flexible coating has superior wet and dry grip
The Standard Range of Spill Kits are designed for indoor and outdoor spills on both sealed and unsealed surfaces. These can include sealed surfaces such as asphalt, concrete or metal, and also unsealed surfaces such as dirt or gravel. To ensure you can handle any spill incident, they contain a range of absorbents from pads, socks, cushions to granular absorbent.
Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.
The Toledoshield Cut 5D Resistant Hi-Vis Safety Glove is a high performance cut resistant safety glove for use in all applications handling sharp objects. Tested to AS/NZ 2161.3.2005. These gloves feature an ultra thin 15G liner delivering unmatched flexibility, tactility, fit and feel. Innovative antibacterial technology prevents odours and discomfort. NBR Dry Foam palm for ultimate grip in wet and oily conditions. NBR Thumb crotch provides additional protection while reducing wear and tear on the glove. DMF and Silicone Free.
AS/NZ 2161.3.2005 rating 18.104.22.168.D
EN388:2016 rating 22.214.171.124.DX
The Toledoshield Cut Resistant Safety Gloves are recommended for use in applications such as:
The GuardDog drain filter offers a revolutionary approach to sediment control. It fits over most stormwater drains to effectively prevent silt, sediment, hydrocarbons and debris from entering our waterways and ocean.
The GuardDog works by using an innovative absorbent media called Spilltration® Husky, which is made from 100% recycled post-consumer waste. The material’s fibres absorb hydrocarbons and trap sediment particles as small as 53 microns (0.053mm), finer than a human hair. Spilltration® Husky also delivers exceptional water flow characteristics due to its unique construction, which allows water to wick through, even when saturated with oil.
The GuardDog features a heavy-duty polyethylene mesh top for drive over durability. The Spilltration® Husky absorbent media removes and traps oils, fuels, sheens and sediment. A raised centre helps to create a damming effect and improve performance in high flow situations. Overflow port prevents water from backing up in heavy rain events. Eyelets provide a means to secure the GuardDog to metal grates with metal ties or concrete bolts.
The standard GuardDog drain filter is designed to fit most box and v-grate drains. The side-entry GuardDog is wider and features aluminium strips to contour around most kerb inlet drains with or without grates. Custom sizing is also available by request.
The GuardDog is ideal for protecting drains during construction activity. It can also be used in carparks, manufacturing facilities, waste management, rail yards, refineries. The GuardDog helps to improve environmental compliance and avoid penalty notices.
The GuardDog can be installed in a variety of ways. It can be screwed directly into the concrete, secured to drain grates via metal cable ties or using high-powered magnets. See our installation guide to find out more.
Alternatives such as silt socks and coir logs do not trap hydrocarbons, and drain pollution guards can become overloaded to block drains and cause flooding. Unlike silt socks the GuardDog will not split if driven over – it’s a low profile solution that’s foot and vehicle traffic friendly.
The GuardDog drain filter was verified by the Infrastructure Sustainability Council (ISC) as Australia-first innnovation for its use on the Monash Freeway upgrade. It is listed on iSupply and may assist in obtaining IS Credits for Receiving Water Quality (ISv1.2 Dis-1 / ISv2.1 Env-1), Diversion from Landfill (ISv1.2 Was-2), Innovation Challenge 8 (ISv1.2 & ISv2.1 Inn-1). To find out more contact your Stratex representative.
The Stratex Recycled Silt Sock is Australia’s first 100% recycled silt sock. It’s made using temporary banner mesh and reclaimed aggregate from our civil construction partners, disrupting the landfill waste stream.
Silt socks provide a simple yet effective sediment and erosion control method. They can be placed in and around worksite stormwater drains and gutters. Their purpose is to protect waterways from contaminated runoff by retaining silt and sediment during heavy rain.
This silt sock features an additional hydrocarbon filter, achieved with a layer of Spilltration Husky material. The material will absorb the hydrocarbon oily sheen while allowing water to flow through.
In addition to using recycled materials in its construction, Stratex Recycled Silt Socks are produced in collaboration with a local social enterprise, Assembled Threads. This partnership ensures a high quality of product is achieved, whilst helping to provide meaningful employment opportunities for individuals from Culturally and Linguistically Diverse (CALD) backgrounds.