DrainSAFE Stormwater Isolation Device – 150mm

The GuardDog drain filter offers a revolutionary approach to sediment control. It fits over most stormwater drains to effectively prevent silt, sediment, hydrocarbons and debris from entering our waterways and ocean.

• Traps sediment and hydrocarbons
• Improves water receiving quality
• 100% recycled absorbent media
• 53 micron filtration (0.053mm)
• Absorbs up to 12 litres of hydrocarbons
• Lightweight, low profile and durable
• Side-entry GuardDog features aluminium side strips for a perfect fit around kerbs

Filtration Innovation

The GuardDog works by using an innovative absorbent media called Spilltration® Husky, which is made from 100% recycled post-consumer waste. The material’s fibres absorb hydrocarbons and trap sediment particles as small as 53 microns (0.053mm), finer than a human hair. Spilltration® Husky also delivers exceptional water flow characteristics due to its unique construction, which allows water to wick through, even when saturated with oil.

Performance by Design

The GuardDog features a heavy-duty polyethylene mesh top for drive over durability. The Spilltration® Husky absorbent media removes and traps oils, fuels, sheens and sediment. A raised centre helps to create a damming effect and improve performance in high flow situations. Overflow port prevents water from backing up in heavy rain events. Eyelets provide a means to secure the GuardDog to metal grates with metal ties or concrete bolts.

Suitable for Most Drain Types

The standard GuardDog drain filter is designed to fit most box and v-grate drains. The side-entry GuardDog is wider and features aluminium strips to contour around most kerb inlet drains with or without grates. Custom sizing is also available by request.

When to use one?

The GuardDog is ideal for protecting drains during construction activity. It can also be used in carparks, manufacturing facilities, waste management, rail yards, refineries. The GuardDog helps to improve environmental compliance and avoid penalty notices.

Installation Versatility

The GuardDog can be installed in a variety of ways. It can be screwed directly into the concrete, secured to drain grates via metal cable ties or using high-powered magnets. See our installation guide to find out more.

Superior to Alternatives

Alternatives such as silt socks and coir logs do not trap hydrocarbons, and drain pollution guards can become overloaded to block drains and cause flooding. Unlike silt socks the GuardDog will not split if driven over – it’s a low profile solution that’s foot and vehicle traffic friendly.

ISC Verified Innovation

The GuardDog drain filter was verified by the Infrastructure Sustainability Council (ISC) as Australia-first innnovation for its use on the Monash Freeway upgrade. It is listed on iSupply and may assist in obtaining IS Credits for Receiving Water Quality (ISv1.2 Dis-1 / ISv2.1 Env-1), Diversion from Landfill (ISv1.2 Was-2), Innovation Challenge 8 (ISv1.2 & ISv2.1 Inn-1). To find out more contact your Stratex representative.

Polyurethane drain covers are the simplest of all drain covers. Just remove from its cover, unroll, and place it on the drain. The tacky, flexible polyurethane cover forms a tight seal to block out contaminates. These covers temporarily bond to any smooth surface and are resistant to most chemicals including oils, fuels and solvents. Easily cleaned and reused – just wash with warm soapy water and wrap in plastic sheet. Five sizes of covers are available, and a vinyl holdall can also be purchased separately for high visibility storage.

Note this product is designed for emergency use only. Clean after use with warm soapy water. Store below 25°C away from direct sunlight.

Polyurethane drain covers are the simplest of all drain covers. Just remove from its cover, unroll, and place it on the drain. The tacky, flexible polyurethane cover forms a tight seal to block out contaminates. These covers temporarily bond to any smooth surface and are resistant to most chemicals including oils, fuels and solvents. Easily cleaned and reused – just wash with warm soapy water and wrap in plastic sheet. Five sizes of covers are available, and a vinyl holdall can also be purchased separately for high visibility storage.

Note this product is designed for emergency use only. Clean after use with warm soapy water. Store below 25°C away from direct sunlight.

Our drain pollution guards (or drain wardens) are a unique and cost-effective solution to prevent drains from congestion while protecting our waterways. The pollution guard fits easily under the drain and captures rubbish, debris and coarse sediments. A low resistance to water flow ensures effective drainage while the included bilge boom removes hydrocarbons, oils and fuels. Designed for use on construction sites, civil work sites, delivery docks, retail centres and parking lots. Available in two standard sizes, sides can be trimmed when in place to custom fit the space you require.

The GuardDog Magnetic Mounting Kit includes everything you need to mount your GuardDog Drain Filter to a grated stormwater drain.

Each magnet features power 22kg pull strength.

Each kit includes:

• 4 x Neodymium threaded magnets + nuts
• 4 x Angle pieces (optional for installation)