Aluminium Floor Bunding – 30mmH x 185mmW x 1200mmL

The Standard Range of Spill Kits are designed for indoor and outdoor spills on both sealed and unsealed surfaces. These can include sealed surfaces such as asphalt, concrete or metal, and also unsealed surfaces such as dirt or gravel. To ensure you can handle any spill incident, they contain a range of absorbents from pads, socks, cushions to granular absorbent.

Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.

Dewatering Bags, also known as Sediment Filter Bags, are perfect for pumping and filtering sediment laden water from construction or mining sites. They provide a cost effective and simple method of removing silt and heavy particles from excavation water. Manufactured from strong non-woven geotextile which allows water to filter freely through the bag while retaining solids. Flow rate of 80L/m2/sec, subject to variation during usage. Featuring a 100mm diameter hose inlet as standard, the Dewatering Bags can be custom made almost any size to suit different project requirements.

The Silt and Hydrocarbon Filter Bags include an oil absorbent filtration media inside the geotextile bag. They are used to dewater an area containing both hydrocarbon and sediment contamination.

Designed to absorb and contain hydrocarbon spills including oil, fuel, solvents, petrol & diesel. These absorbents repel water, meaning they are ideal for outdoor environments and when spills occur on waterways such as drains, ports, marinas, harbours, lakes and rivers. The hydrophobic (water repellent) absorbents will float, even when fully saturated with oil. The ultra-absorbent filling on the sock makes them perfect for containing and absorbing oil and fuels on your site. A 1.2m sock can absorb up to 4.5 litres.

Stratex Coir Fibre Logs are made from natural coconut fibre bound by a 100% biodegradable coir fibre netting. Wooden Stake installation is quick and easy with pre-drilled holes. They are ideal for constructing check structures, sediment control, managing changes in stream flow velocity, shaping channels and stabilising banks and shorelines. 
An environmentally friendly solution for bush regeneration projects, coir logs help hold moisture for tree and plant growth whilst providing a structure for vegetation to establish and take hold for long term stabilisation. 

Features

• Pre-drilled holes for quicker and easier stake installation
• Save on installation time and costs
• Uses less wooden stakes on installation
• Higher density fibres for increased performance and life span
• Dimensions: 200mm x 2.4m

Manual Handling Risks with Coir Logs

Some coir logs can be as large as 300mm in diameter and 3m long. On average these weigh over 20kg. They are heavy, cumbersome and usually require two people to unload and install on site. Given their length and weight, there is an increased risk of manual handling injury to operators. Stratex Coir Logs are 200mm diameter, 2.4m in length and weigh under 12kg, allowing safer handling by an individual operator. This unique sizing not only provides the benefit of lower freight cost to site, but more importantly are a safer and easier product to install.

Minimum purchase quantity of 10.

Pallet quantity: 30

Double the size and absorbent capacity of the 120 Litre Kits, the Stratex Economy 240 Litre Spill Kit range are a great value and high performing method of hazardous spill response. Packed with a range of absorbents designed to contain and clean up spills on both sealed and unsealed surfaces. Place these kits in strategic positions around your worksite to ensure compliance with environmental requirements.

Stratex Spill Kits are an integral part of compliance with Australian standards and regulations, and our absorbents are quality tested.